Citra SMaSH

Grain Bill / Fermentables

  • 10 Lbs Maris Otter

Hops

  • 6 oz Citra(12 AA)

Yeast

  • Mangrove Jack’s M36 Liberty Bell Ale

Gravity

  • OG 1.056
  • FG 1.020
  • ABV 4.73%
  • IBU 108

Brew Day

Heat 6 gallons of water to 163°.

Gently dough in grains until all grain is covered by water.

Mash grains at 150° for 1 hour.

Remove “grain bag” and allow grains to drain.

Rinse grains using a colander and get every last drop of wort potential.

Remove false bottom from brew pot.

Add 1 oz Citra hops (FWH).

Bring wort to a boil and continue for 30 minutes.

Add 1 oz Citra hops. and continue boil for another 20 minutes.

Add 1 oz Citra hops and continue boil for 10 minutes.

Remove from heat source and drop wort temperature to 160°.

Add 1 oz Citra hops and continue hop stand for 1 hour.

Reduce wort temperature to 68° and take OG reading.

Sufficiently aerate and transfer to primary fermenter.

Pitch dry yeast directly into fermenter.

Allow beer 2~3 weeks in the primary to adequately ferment and cleanup any diacetyl produced during fermentation.

Transfer to secondary for 1 week adding 2oz Citra for dry hop.

Bottle and wait another 2 weeks…

Enjoy!

 

Notes:

  • January 15th, Brew Day
  • Yeast activity was visible from airlock bubble after 8 hours.
  • 1/4 inch krausen after 16 hours.
  • 1/2 inch max krausen.
  • Krausen dropped out after 48 hours.
  • January 18th (~72 hours), Airlock bubbles still active every ~1 minute.
  • January 20th (5 days), added 3/4 tsp gelatin finings.
  • January 22nd, beer cleared within 48 hours.
  • January 23rd (9 days), 1.020 gravity, mild citrus taste, no off flavors and lightly bitter.
  • January 25th (11 days), Dry Hop Day!
    • Because the beer cleared nicely I decided to dry hop in the primary, which appears to have reinvigorated the yeast reducing clarity. :/
  • February 2nd (19 days), beginning cold crash packing the primary with ice in the brew kettle overnight.
  • February 3rd (20 days), repacked with fresh ice in the AM to continue cold crash, prepping for bottling in the PM.
    • This is sufficient to drop most hop material to the bottom of the primary.